{"id":1840,"date":"2015-08-10T15:20:55","date_gmt":"2015-08-10T19:20:55","guid":{"rendered":"http:\/\/www.thedailysew.com\/?p=1840"},"modified":"2016-08-03T11:33:13","modified_gmt":"2016-08-03T15:33:13","slug":"how-to-make-a-pattern-from-a-favorite-garment","status":"publish","type":"post","link":"https:\/\/thedailysew.com\/blog\/2015\/08\/how-to-make-a-pattern-from-a-favorite-garment\/","title":{"rendered":"How to Make a Pattern From a Favorite Garment"},"content":{"rendered":"

\"make<\/p>\n

Ever put on a garment and wish you had another one like it? Maybe in a different color or maybe just more in the same color. Maybe you\u00a0want an exact replica or maybe you want a different sleeve length, or to alter the fit just slightly. This isn’t a problem if you sewed it to begin with and saved\u00a0the pattern. But what if\u00a0you didn’t make it, or don’t have the pattern? Still not a problem; you can make a pattern from your garment.<\/p>\n

It’s as simple as tracing your garment. Sounds easy and yet a little daunting too. Here’s some tips I remembered (or was reminded of) last week when I traced off a simple top of my mom’s to\u00a0make her some more in different colors.<\/p>\n

I break projects up into steps so they fit into my schedule better and are not overwhelming. There are five steps to making a pattern from finished clothes:<\/p>\n

    \n
  1. Gather<\/li>\n
  2. Trace<\/li>\n
  3. Smooth, true and alter<\/li>\n
  4. Add seam allowance<\/li>\n
  5. Make a test garment (muslin)<\/li>\n<\/ol>\n

    GATHER<\/h4>\n

    Pick a simple garment <\/strong>(Especially for your fist attempts.) Analyze the construction of the garment and be sure you know how you’re going to sew it up. If you are uncertain you can look at a sewing pattern\u00a0for a similar shirt, pant, or skirt, etc and follow their order of steps. Or come up with ways to simplify the design and therefore the construction. (Eliminate some details; use a method of closure you know how to put in better.)<\/p>\n

    \"Trace<\/p>\n

    Gather supplies.<\/strong> Use pencil and tracing paper. Have a flat hard surface at a comfortable height to work on. A digital camera (ok, your phone) to take pictures of the garment if it\u00a0isn’t yours to look at while you construct it.<\/p>\n

    TRACE<\/h4>\n

    Lay the garment as flat as possible<\/strong> in such a way as to see the entire part (the sleeve, the peplum, the side front, etc.) that you need to trace. This may mean\u00a0folding\u00a0some pieces of the garment behind the part you want to trace off. You will need the garment inside out to see the facings.<\/p>\n

    \"Trace<\/p>\n

    Trace off only half of any part if it’s symmetrical\u00a0<\/strong>(the front, the sleeve, any piece cut on the fold). \u00a0Because fabric moves and shifts while you trace, tracing both halves of a symmetric piece will not come out symmetrical. You will have to decide which half came out better\u00a0so just trace half and save yourself time.<\/p>\n

    Pin the front and back together<\/strong> at the hem and\/or neck\u00a0to keep the garment lined up. Don’t line up the hems if you know the back and\u00a0front are not equal in length.<\/p>\n

    \"Trace<\/p>\n

    Trace the seams<\/strong> not the cut edge of the garment. The seam allowance doesn’t matter right now. To replicate the original fit you want to trace the seams.<\/p>\n

    Place pins along the seams<\/strong> of richly textured fabric.\u00a0This helps you feel where the seam is when tracing lumpy\/plush fabric.<\/p>\n

    Guess<\/strong> and fill in any seam lines\u00a0that maybe obscured by the garment’s construction.<\/p>\n

    \"Trace<\/p>\n

    If possible, facings are\u00a0traced off as part of the piece they are sewn to<\/strong>. When you can turn a garment inside out to trace, trace off the outer edge of the facing onto your tracing of the outer\u00a0garment piece. Facings do not require a separate tracing if you can clearly see it while tracing the garment piece it is attached to. The outer garment fabric and the facing share at least one edge (the neck, the center front, the armscye) so you are already half way done with tracing the facing.<\/p>\n

    \"Trace<\/p>\n

    Note any construction details.\u00a0<\/strong>Literally, scribble a note right there on your tracing. Also mark on your tracing where slits end, where\u00a0gathers end and begin, and\/or button placement.<\/p>\n

    Check that\u00a0you’ve trace all the pieces of your garment.<\/strong><\/p>\n

    SMOOTH, TRUE and ALTER<\/h4>\n

    \"Trace<\/p>\n

    After you’ve trace all the pieces off your garment set it aside.<\/p>\n

    You will notice the\u00a0lines of your tracings are probably a little wobbly -the more your fabric moved the more crooked the lines. Well, we’re about to take care of that so get your rulers, french curves, eraser, sharper pencil and good lighting.<\/p>\n

    \"trace<\/p>\n

    Smooth your traced off curves and straighten your lines<\/strong> with a ruler, hip curve or french curve and sharp pencil. Erase or put “x”s on old lines to remember which line you want to use and which line to ignore.<\/p>\n

    \"trace<\/p>\n

    Make any alterations you know you need<\/strong>. Like adding or subtracting length between shoulder and bust apex or taking in at the side seam.<\/p>\n

    Mark notches or placement dots<\/strong> where\u00a0needed for constructing the garment.<\/p>\n

    Cut along dart seam and spread open<\/strong> dart matching the dart width in the original garment. Tape down open dart to some paper placed under your tracing.<\/p>\n

    \"trace<\/p>\n

    Add hems<\/strong> to pattern pieces if deeper than a mere seam allowance.<\/p>\n

    \"trace<\/p>\n

    Add paper to your tracing<\/strong> if needed with tape. (I use Scotch Magic Tape because you can write on it and see through it.)<\/p>\n

    \"Trace<\/p>\n

    Walk the pattern pieces together<\/strong> as if you were sewing them together to see if the seams match. For instance, place the front bodice shoulder on top of the back bodice shoulder and line \u00a0up the seam lines at the neck edge. one on top of the other, as if they are fabric and you’re sewing them together. Check that they are the same length.<\/p>\n

    \"trace1\"<\/p>\n

    If seams match you’re good. If not, first exam the traced garment to see if one pieced was eased into the other piece. Then you will know the different lengths are on purpose. More than likely though it’s just a little off from tracing, and smoothing and all that. When they are off, anywhere, not just in the length, you split the difference; sometimes twice.<\/p>\n

    \"trace<\/p>\n

    \"trace3\"<\/p>\n

    Above my shoulder seam was off about 1\/4″. First I visually split the 1\/4″ between\u00a0the neck and the sleeve. Then at both the neck and the sleeve ends of the shoulder seam I redrew my curve to take a little off the side with extra and add a little to the side that was lacking.\u00a0Having a difference in seams can happen anywhere.\u00a0Splitting the difference (if it’s not a huge difference) is how to true up your seams.<\/p>\n

    Trace off any facings<\/strong>, yokes, pockets onto a new piece of paper\u00a0from your original tracing. You trace off the facings after you have walked the pattern pieces together and trued any seams.<\/p>\n

    Slash and spread the pattern where the garment was gathered<\/strong>. Spread the gathered area to be\u00a0equal to the width of the garment fabric before it was gathered. It’s hard to tell exactly what the original width was but you can make a good guess. Is it two inches\u00a0of fabric gathered down to one inch? Or is it really full, more like four inches gathered to one? You can play with gathering a certain length of scrap fabric to the finished length you need and adjust from there.<\/p>\n

    Label the pattern pieces<\/strong> with a grain line, tittle, part name, how many to cut, size if you know it.<\/p>\n

    Add the seam allowances<\/strong>. Use what ever amount of seam allowance you like to work with. You know the garment fits so you may want only a 1\/4″ seam allowance; eliminating any extra bulk or tedious trimming of the seam allowance.<\/p>\n

    \"adding<\/p>\n

    \"adding<\/p>\n

    An easy way to add seam allowances to curves is to place your ruler on the seam line at the desired width you want and mark with dots or short dashes as you move down the seam. Then connect your dots or dashes.<\/p>\n

    TEST GARMENT<\/h4>\n

    Make a test garment out of a cheaper but similar in drape\/weight fabric to test your pattern. Try it on and make any alterations needed to the paper\u00a0pattern.<\/p>\n

    At any point you can retrace your pattern onto a new sheet of tissue for a clean start.<\/p>\n

    TRY IT<\/h4>\n

    Try tracing off one of your garments just for fun and the experience of doing it. Think of the money you’ll save on patterns when you master this copy cat method. (Just kidding\u00a0because I still buy patterns; all the time.)<\/p>\n

    \"Disclaimer\"<\/p>\n","protected":false},"excerpt":{"rendered":"

    Ever put on a garment and wish you had another one like it? Maybe in a different color or maybe just more in the same color. Maybe you\u00a0want an exact replica or maybe you want a different sleeve length, or to alter the fit just slightly. This isn’t a problem if you sewed it to […] Read more…<\/a><\/p>\n","protected":false},"author":2,"featured_media":1873,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[239],"tags":[207,57,205,12,206],"class_list":["post-1840","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-pattern-making","tag-coping-a-garment","tag-pattern-making","tag-patternmaking","tag-patterns","tag-tracing-off-a-garment"],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"https:\/\/thedailysew.com\/blog\/wp-content\/uploads\/2015\/08\/make-a-pattern-from-a-favorite-garment.jpg","jetpack_shortlink":"https:\/\/wp.me\/p1EZxn-tG","_links":{"self":[{"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/posts\/1840","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/comments?post=1840"}],"version-history":[{"count":15,"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/posts\/1840\/revisions"}],"predecessor-version":[{"id":1876,"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/posts\/1840\/revisions\/1876"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/media\/1873"}],"wp:attachment":[{"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/media?parent=1840"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/categories?post=1840"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/thedailysew.com\/blog\/wp-json\/wp\/v2\/tags?post=1840"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}